Shinemaster register address meaning
Register address
0
Shinemaster language, 0: English, 1: Chinese, 2: Portuguese
1
Shinemaster protocol type, 0: Modbus_TCP, 1: Internal
2
version number of this protocol
3
Shinepano Backlight Delay
4
The time interval for Shinemaster to transmit data to the web server, in minutes
5
The initial search address of the inverter for Shinemaster
6
End search address of the inverter for shinemaster
7
super administrator privileges
8
Shinemaster 10 bits SN
9
Inverter inquiring time delay
10
The identification of updating the firmware of Shinemaster 0: normal work, 1: update the firmware
11
The Wifi module cannot use FTP, It is used for the FTP setting of shinemaster updates its own firmware and photovoltaic device firmware
12
DNS configuration of Shinemaster
13
Datalogger Type: 9: Shinelan 12: Shinemaster 20: Shinemaster4G
14
Shinemaster local IP address, Null Server won’t display it
15
Shinemaster local port
16
MAC Physical Address Shinemaster connects to internet
17
Server IP address Shinemaster connects
18
Server Port Shinemaster connects
19
Server Domain Name
20
Shinemaster safety type
21
Shinemaster Firmware version, compatible with FTP
22
Shinemaster Hardware Version
23
Zigbee Network ID
24
Zigbee Network Channel Number
25
Subnet mask of Shinemaster
26
Default Gateway of Shinemaster
27
Wireless Module Type Setting
28
Not Used, PV Peripheral Devices enable settings , these factory states are disabled, Default value: 0, 0, 0,# 0, 0, 0 # 0, 0, 0, #
29
GPS latitude, longitude
30
time zone
31
System time of Shinemaster
32
Shinemaster restart sign, 0: work normally 1: restart Shinemaster
33
Clear Shinepano sign of data recoridng, 0: work normally, 1: clear ShinePano all data recording
34
Correct Touching screen sign on Shinepano
35
Recover factory set sign on Shinemaster 0: work normally
36
Identification of data polling for photovoltaic equipment , 0: Polling for photovoltaic devices
37
Definition of the polling section of Shinemaster on the function code No. 03 of the inverter, there are 2 sections on default: 0, 44 # 45, 89#
38
Shinemaster 30 bits S/N
39
Reserved Parameters
40
Limit the number of inverters monitored by Shinemaster, the default is 0, the valid value is [1,32], other values are illegal
41
communication protection time. When Shinemaster can’t get data from inverter, and it has persisted for a period of time, it will execute restarting . The parameter is used to set and read the time
42
Data Transmiting Mode, 0: protocol transimitting mode, 1: transparent transimitting mode
43
Reserved, Webbox usage
44
Inverter upgrading choice
45
network type: 1, wireless, 2. wired
46
Register Device
47
The first Channel 485 Baud rate, “1”:4800；”2″:9600,”3″:38400, “4”:115200
48
The second Channel 485 Baud rate, “1”:4800；”2″:9600,”3″:38400, “4”:115200
49
Testing mode; 0: Work normally, 1: Testing Mode, 2. Aging mode, 3. Exporting current limitation Test, 4. Get storage data mode
50
SD card status: 0: Normal, 1: Malfunction
64
SIM Card Operator
65
Pairing Enabled
66
Exporting Current limitation Function Enable or Disable
67
Set Exporting current limitation power
68
RF Communication Signal increment
69
Check if succesful since last paring query
70
SCADAMode: 1. Enable 0. Disable
71
DHCP function Enable or Disable
72
1.Get APN automatically 2. Set APN manually
73
Meboost Regular Boiling time
74
Meboost manual mode working time
75
0: Dont’ make R485_1 baud rate fixed 1: When upgrading, make RS 485_1的波特率 fixed
89
Exporting current limitation address : default address is 0
90
Exporting current limitation Channel: Default is second channel
91
Exporting current limitation failure power percentage
92
Exporting current limitation function failure time. 0-5000
93
0: not connected to national grid , 1. connected to grid
94
0: Diable 1:enanble exporting current limiation failure function
95
PF : 0.8-1
96
0: disable adjsuting reactive power 1: Enable adjusting reactive power
97
0: disable reactive power priority 1: enable reactive power priority
98
0: new version exporting current limitation 1: enable old version exporting current limitation
99
0: Reactive power adjusting Scenario 0: NO_1 1: NO_2
Original document
