Hope Battery upper Software Introduction: ESS_LV_CAN_GeneralMonitor R1.6.4 CAN Tool 1. Config 2. Main Page 3. BCU page 4. BMU page 5. History Data page 6. dataMigrate Click EraseforeverAlarm and clear all fault 7. ParamWrite 8. ProductInfo 9. BCUInfo 10. ModuleInfo 11. Upgrade Page
Hope Battery troubleshooting This post has introduced how to disassemble battery , how to use upper software, and basic pin layout etc. Hope battery Operation Hope battery Fault Clearing When battery enter fault state, please click Blue arrow position to clear fault
Upgrading Hope Battery using CANalyst Device and Upper Software. You can download the pdf below to see all the instructions.
Hope battery Maintenance instruction Hope-3.3L-C1 Battery Feature 1. Hope battery can work with max 8 pcs in parallel 2. Hope battery 3.3L-C1 can not be compatible with Hope battery 4.8L-C1 3. Hope battery 4.8L-C1 can work max 16 pcs in parallel Hope battery Maintenance instruction Hope battery quick guide Download
How to use can box to read hope battery info. 1. CANalyst-II 2. CANalyst-II installment CANalyst-II diagram，“1”is CAN1-H，“2”is CAN1-L,”3”is CAN2-H，“4”is CAN2-L； 3. Hope Battery 3.3KWh Cable can be plugged in Link-IN or Link-OUT, Procedures: a) Insert Crystal Plugs to Link-in and Link-Out Like below firstly b) Unplug one of Crystal plugs c) Connect upper software …