How to adjust to battery voltage on sPF 5000ES Or sPF 5000TL hvm WPV
Procedures
Please note that the method just can be used for several voltage difference between real battery voltage and LCD Display. If the difference is large, maybe board is something wrong.
- Only connect battery to inverter( Don’t connect inverter to utility, PV system and load ); It mainly prevents the big fluctuation on battery voltage.
- Press UP an Down at the same time for 3 seconds and type 111 , then press Enter
- Turn to “bAT.V” page on LCD
- Example
Hi All
I have a issue my batteries LI are set to 20% cutoff and 55% Back To AC but when on bypass and on AC they drain at night till about 40% using 34 w all the time even when on AC is that normal or am I missing a setting
Thanks
Okker
Dear Sir,
please advise 1st to 21th option, Inverter S/N also needs to be provided.I will give you answer ASAP.
Thanks!
*How To Adjust To Battery Voltage On SPF 5000ES Or SPF 5000TL Hvm WPV*
Would we please clarify more what do these settings do?
When you switch to “BAT” Page, then press “Enter” and move the cursor to the number position. “A” means accumulate, “S” means minus, you can achive the funciton that increase voltage and reduce voltage.