- This topic has 0 replies, 1 voice, and was last updated 11 months, 1 week ago by
.
Viewing 1 post (of 1 total)
-
Posts
-
Hello
Today I fixed the CN1 connector that was issuing a 02 warning.
When I started back the inverter with battery only (47.2V), the 200A/58V fuse on the motherboard burned right after the initialization.
Before replacing it, I would like to understand what happened.
The voltage of the battery is 47v and there is no sign of short circuit
Thanks in advance
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.